Tribological study comparing pag and poe lubricants used in air-conditioning compressors under the presence of co₂

Polyalkylene glycol (PAG) and polyolester (POE) synthetic lubricants are good candidates for air-conditioning systems that work with alternative refrigerants such as carbon dioxide (CO₂). Both synthetic lubricants are widely used in air-conditioning compressors and have been optimized for use with hydrofluorocarbon (HFC) refrigerants. However, it is still not clear which lubricant is more suitable for use in compressors operating with CO₂ as a refrigerant. This study compares the performance of PAG and POE lubricants of the same viscosity (ISO VG 68) used in air-conditioning compressors. The materials used were Al390-T6 disks and hardened steel SAE 52100 pins. The tests were performed using a high pressure tribometer (pin-on-disk configuration) in the presence of CO₂. The results showed that scuffing and wear resistance of Al390-T6 tested with PAG were superior compared to the samples tested with the POE lubricant. Chemical analysis using X-ray photoelectron spectroscopy showed that PAG tends to promote the formation of carbonate layers on the surface, leading to improvement in the tribological performance of the interface.