Photodetection Enhancement via Graphene Oxide Deposition on Poly 3-Methyl Aniline

A graphene oxide (GO)/poly 3-methyl aniline (P3MA) photodetector has been developed for light detection in a broad optical region: UV, Vis, and IR. The 3-methyl aniline was initially synthesized via radical polymerization using an acid medium, i.e., K₂S₂O₈ oxidant. Consequently, the GO/P3MA composite was obtained through the adsorption of GO into the surface of P3MA. The chemical structure and optical properties of the prepared materials have been illustrated via XRD, FTIR, SEM, and TEM analysis. The absorbance measurements demonstrate good optical properties in the UV, Vis, and near-IR regions, although a decrease in the bandgap from 2.4 to 1.6 eV after the composite formation was located. The current density (J_ph) varies between 0.29 and 0.68 mA·cm⁻² (at 2.0 V) under dark and light, respectively. The photodetector has been tested using on/off chopped light at a low potential, in which the produced J_ph values decrease from 0.14 to 0.04 µA·cm⁻², respectively. The GO/P3MA photodetector exhibits excellent R (and D) values of 4 and 2.7 mA·W⁻¹ (0.90 × 10⁹ and 0.60 × 10⁹ Jones) in the UV (340 nm) and IR (730 nm) regions, respectively. The R and D values obtained here make the prepared photodetector a promising candidate for future light detection instruments.