Abstract
This work is focused on using MXene and reduced graphene oxide coated glass fabrics for manufacturing multifunctional aerospace composites. The coated fabrics acted as sensors and provided useful information about key manufacturing parameters during processing, and mechanical response of the final composite. The electrical resistance changes during resin infusion manufacturing stages such as compaction, resin flow, and resin cure were monitored experimentally. In addition to process monitoring, the utility of manufactured laminates for structural performance was demonstrated by monitoring the piezoresistive response during quasi-static and cyclic flexural tests. The dynamic mechanical analysis (DMA) experiments showed that these in-situ fabric sensors could also detect the thermomechanical response of the composite via monitoring the piezoresistive changes when the temperature is changing. Finally, the electromagnetic interference (EMI) shielding effectiveness was also measured for both types of composites, where MXene based composites showed better shielding effectiveness as compared to reduced graphene oxide-based composites.
Original language | British English |
---|---|
Article number | 107351 |
Journal | Composites Part A: Applied Science and Manufacturing |
Volume | 165 |
DOIs | |
State | Published - Feb 2023 |
Keywords
- 2D materials
- Mechanical properties
- Process monitoring
- Structural health monitoring