Microfluidic Devices with Patterned Wettability Using Graphene Oxide for Continuous Liquid-Liquid Two-Phase Separation

Research output: Contribution to journalArticlepeer-review

24 Scopus citations

Abstract

This article presents a simple method to pattern the surface energy of a substrate using standard microfabrication techniques. Microfluidic devices with hydrophobic polymer substrate patterned with hydrophilic graphene oxide (GO) for the separation of liquid-liquid two-phase systems are reported. The microdevice consists of a cyclic olefin copolymer (COC) substrate bonded to a polydimethylsiloxane (PDMS) element that includes a microchannel. The patterned GO film is characterized using scanning electron, atomic force, and metallurgical microscopies. The contact angle of water on COC surface is measured to be more than 120° and is approximately 10° on the GO-patterned COC surface. Different contact angles could be achieved by tuning the GO with oxygen containing functional groups as well as using different concentrations of GO dispersions. The device is used to separate dye-water droplets dispersed in silicone oil by steering the droplets toward a designated outlet. Using GO as a patterned thin film with tunable hydrophilicity allows for on-chip continuous full separation of water droplets at different flow rates.

Original languageBritish English
Pages (from-to)3471-3477
Number of pages7
JournalACS Applied Nano Materials
Volume3
Issue number4
DOIs
StatePublished - 24 Apr 2020

Keywords

  • COC
  • GO film
  • graphene oxide
  • oil-water
  • patterned surface energy
  • patterned wettability
  • separation

Fingerprint

Dive into the research topics of 'Microfluidic Devices with Patterned Wettability Using Graphene Oxide for Continuous Liquid-Liquid Two-Phase Separation'. Together they form a unique fingerprint.

Cite this