Investigation of fluidized bed behaviour using electrical capacitance tomography

Abdelwahid Azzi, Hiba Bouyahiaoui, Abdallah S. Berrouk, Andrew Hunt, Ian S. Lowndes

Research output: Contribution to journalArticlepeer-review

9 Scopus citations


The temporal and cross-sectional distributions of particles in a 127 mm diameter fluidized bed have been obtained using a new generation, high-speed electrical capacitance tomography. Two planes of eight electrodes were used and mounted at 160 and 660 mm from the gas distributor which was a 3 mm thick porous plastic plate (maximum pore size of 50-70 μm). 3 mm diameter, nearly-spherical polyethylene granules made up the bed. Experiments at sampling frequencies of 200-2000 cross-sections per second and gas superficial velocities from just below the minimum fluidization to 83% above minimum fluidization velocities were used. The time series of the cross-sectional average void fractions have been examined both directly and in amplitude and frequency space. The last two used probability density functions and power spectral densities. The information gathered shows that the fluidized bed was operating in the slugging mode, which is not surprising given the size of the particles. It has been found that an increase in the excess gas velocity above the minimum fluidization velocity resulted in an increase in the mean void fraction, an increase in the length and velocity of the slug bubbles as well as the bed height, and a slight decrease in the slug frequency. The results are presented in a level of detail suitable for comparison with later numerical simulation.

Original languageBritish English
Pages (from-to)1835-1848
Number of pages14
JournalCanadian Journal of Chemical Engineering
Issue number8
StatePublished - 1 Aug 2020


  • electrical capacitance tomography
  • fluidized bed
  • minimum fluidization
  • slugging regime


Dive into the research topics of 'Investigation of fluidized bed behaviour using electrical capacitance tomography'. Together they form a unique fingerprint.

Cite this