Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi1/3Mn1/3Co1/3O2

Ya Mei Han; Zheng Fu Zhang; Li Bo Zhang; Jin Hui Peng; Meng Bi Fu; C. Srinivasakannan; Jiang Du

doi:10.1016/S1003-6326(13)62822-8

Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi_1/3Mn_1/3Co_1/3O₂

Ya Mei Han
, Zheng Fu Zhang
, Li Bo Zhang
, Jin Hui Peng
, Meng Bi Fu
, C. Srinivasakannan
, Jiang Du

Chemical and Petroleum Engineering

Kunming University of Science and Technology

Research output: Contribution to journal › Article › peer-review

6 Scopus citations

Abstract

A novel synthesis method of carbon-coated LiNi_1/3Mn _1/3Co_1/3O₂ cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF) and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNi_1/3Mn_1/3Co _1/3O₂ material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNi_1/3Mn_1/3Co_1/3O₂. The specific discharge capacity retention of the carbon-coated LiNi_1/3Mn _1/3Co_1/3O₂ reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.

Original language	British English
Pages (from-to)	2971-2976
Number of pages	6
Journal	Transactions of Nonferrous Metals Society of China (English Edition)
Volume	23
Issue number	10
DOIs	https://doi.org/10.1016/S1003-6326(13)62822-8
State	Published - Oct 2013

UN SDGs

This output contributes to the following UN Sustainable Development Goals (SDGs)

SDG 7 Affordable and Clean Energy

Keywords

lithium-ion battery cathode material carbon coating microwave pyrolysis method electrochemical performance

Access to Document

10.1016/S1003-6326(13)62822-8

Cite this

@article{3308cfb6172d458f82b97b5a16e7d556,

title = "Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi1/3Mn1/3Co1/3O2",

abstract = "A novel synthesis method of carbon-coated LiNi1/3Mn 1/3Co1/3O2 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF) and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNi1/3Mn1/3Co 1/3O2 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNi1/3Mn1/3Co1/3O2. The specific discharge capacity retention of the carbon-coated LiNi1/3Mn 1/3Co1/3O2 reached 85.0\%-96.0\% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.",

keywords = "lithium-ion battery cathode material carbon coating microwave pyrolysis method electrochemical performance",

author = "Han, \{Ya Mei\} and Zhang, \{Zheng Fu\} and Zhang, \{Li Bo\} and Peng, \{Jin Hui\} and Fu, \{Meng Bi\} and C. Srinivasakannan and Jiang Du",

note = "Funding Information: Foundation item: Project (U1202272) supported by the National Natural Science Foundation of China Corresponding author: Zheng-fu ZHANG; Tel: +86-871-5109952; E-mail: [email protected] DOI: 10.1016/S1003-6326(13)62822-8",

year = "2013",

month = oct,

doi = "10.1016/S1003-6326(13)62822-8",

language = "British English",

volume = "23",

pages = "2971--2976",

journal = "Transactions of Nonferrous Metals Society of China (English Edition)",

issn = "1003-6326",

publisher = "Nonferrous Metals Society of China",

number = "10",

}

TY - JOUR

T1 - Influence of carbon coating prepared by microwave pyrolysis on properties of LiNi1/3Mn1/3Co1/3O2

AU - Han, Ya Mei

AU - Zhang, Zheng Fu

AU - Zhang, Li Bo

AU - Peng, Jin Hui

AU - Fu, Meng Bi

AU - Srinivasakannan, C.

AU - Du, Jiang

N1 - Funding Information: Foundation item: Project (U1202272) supported by the National Natural Science Foundation of China Corresponding author: Zheng-fu ZHANG; Tel: +86-871-5109952; E-mail: [email protected] DOI: 10.1016/S1003-6326(13)62822-8

PY - 2013/10

Y1 - 2013/10

N2 - A novel synthesis method of carbon-coated LiNi1/3Mn 1/3Co1/3O2 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF) and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNi1/3Mn1/3Co 1/3O2 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNi1/3Mn1/3Co1/3O2. The specific discharge capacity retention of the carbon-coated LiNi1/3Mn 1/3Co1/3O2 reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.

AB - A novel synthesis method of carbon-coated LiNi1/3Mn 1/3Co1/3O2 cathode material for lithium-ion battery was reported. The carbon coating was produced from a precursor, glucose, by microwave-pyrolysis method. The prepared powders were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF) and charge/discharge tests. XRD results indicate that the carbon coating does not change the phase structure of LiNi1/3Mn1/3Co 1/3O2 material. SEM results show that the surface of spherical carbon-coated material becomes rough. Electrochemical performance results show that the carbon coating can improve the cycling performance of LiNi1/3Mn1/3Co1/3O2. The specific discharge capacity retention of the carbon-coated LiNi1/3Mn 1/3Co1/3O2 reached 85.0%-96.0% at the 50th cycle at 0.2C rate, and the specific discharge capacity retention is improved at a high rate.

KW - lithium-ion battery cathode material carbon coating microwave pyrolysis method electrochemical performance

UR - https://www.scopus.com/pages/publications/84888387576

U2 - 10.1016/S1003-6326(13)62822-8

DO - 10.1016/S1003-6326(13)62822-8

M3 - Article

AN - SCOPUS:84888387576

SN - 1003-6326

VL - 23

SP - 2971

EP - 2976

JO - Transactions of Nonferrous Metals Society of China (English Edition)

JF - Transactions of Nonferrous Metals Society of China (English Edition)

IS - 10

ER -