Friction and stress distribution in coated steel sheet during forming

Jang Kyo Kim; P. F. Thomson

doi:10.1016/0924-0136(90)90027-R

Friction and stress distribution in coated steel sheet during forming

Jang Kyo Kim
, P. F. Thomson

Mechanical & Nuclear Engineering

Monash University

Research output: Contribution to journal › Article › peer-review

9 Scopus citations

Abstract

The use of lighter-gauge sheet of high-tensile steel for drawn panels has promoted the application of protective zinc or aluminium/zinc coatings. However, lighter-gauge sheet is more subject to loss of shape resulting from elastic distortion after removal of the forming load. In the present work, it was found that zinc and aluminium/zinc coatings change the friction stresses very little and coatings of the thickness employed cause little residual stress; they do not influence spring-back behaviour greatly.

Original language	British English
Pages (from-to)	29-42
Number of pages	14
Journal	Journal of Materials Processing Technology
Volume	21
Issue number	1
DOIs	https://doi.org/10.1016/0924-0136(90)90027-R
State	Published - Jan 1990

Access to Document

10.1016/0924-0136(90)90027-R

Cite this

@article{592157ad59e1434299fa2bd520cf81fa,

title = "Friction and stress distribution in coated steel sheet during forming",

abstract = "The use of lighter-gauge sheet of high-tensile steel for drawn panels has promoted the application of protective zinc or aluminium/zinc coatings. However, lighter-gauge sheet is more subject to loss of shape resulting from elastic distortion after removal of the forming load. In the present work, it was found that zinc and aluminium/zinc coatings change the friction stresses very little and coatings of the thickness employed cause little residual stress; they do not influence spring-back behaviour greatly.",

author = "Kim, \{Jang Kyo\} and Thomson, \{P. F.\}",

year = "1990",

month = jan,

doi = "10.1016/0924-0136(90)90027-R",

language = "British English",

volume = "21",

pages = "29--42",

journal = "Journal of Materials Processing Technology",

issn = "0924-0136",

publisher = "Elsevier Ltd",

number = "1",

}

TY - JOUR

T1 - Friction and stress distribution in coated steel sheet during forming

AU - Kim, Jang Kyo

AU - Thomson, P. F.

PY - 1990/1

Y1 - 1990/1

N2 - The use of lighter-gauge sheet of high-tensile steel for drawn panels has promoted the application of protective zinc or aluminium/zinc coatings. However, lighter-gauge sheet is more subject to loss of shape resulting from elastic distortion after removal of the forming load. In the present work, it was found that zinc and aluminium/zinc coatings change the friction stresses very little and coatings of the thickness employed cause little residual stress; they do not influence spring-back behaviour greatly.

AB - The use of lighter-gauge sheet of high-tensile steel for drawn panels has promoted the application of protective zinc or aluminium/zinc coatings. However, lighter-gauge sheet is more subject to loss of shape resulting from elastic distortion after removal of the forming load. In the present work, it was found that zinc and aluminium/zinc coatings change the friction stresses very little and coatings of the thickness employed cause little residual stress; they do not influence spring-back behaviour greatly.

UR - https://www.scopus.com/pages/publications/0025198225

U2 - 10.1016/0924-0136(90)90027-R

DO - 10.1016/0924-0136(90)90027-R

M3 - Article

AN - SCOPUS:0025198225

SN - 0924-0136

VL - 21

SP - 29

EP - 42

JO - Journal of Materials Processing Technology

JF - Journal of Materials Processing Technology

IS - 1

ER -

Friction and stress distribution in coated steel sheet during forming

Abstract

Access to Document

Other files and links

Fingerprint

Cite this