TY - GEN
T1 - Flow dynamics over two cylinders in tandem subjected to different heating cases
AU - Homsi, Rami
AU - Islam, M. D.
AU - Fatt, Yap Yit
AU - Janajreh, Isam
N1 - Funding Information:
This study is supported by Khalifa University of Science and Technology (Grant CIRA-2020-057). We gratefully acknowledge this support.
Publisher Copyright:
Copyright © 2021 by ASME.
PY - 2021
Y1 - 2021
N2 - Heated and unheated flows with forced convection over two fixed circular cylinders in tandem are studied numerically for 80 ≤ Re ≤ 250 and 1 ≤ T∗ ≤ 2.3. Three different spacing ratios (L/D) = [2, 4, 8] are considered under three heating conditions. The scenarios considered are (1) heated upstream and unheated downstream cylinders, (2) unheated upstream and heated downstream cylinders and (3) heated upstream and downstream cylinders. These scenarios represent the limiting case for a cross-flow heat exchanger, where the downstream tubes are at increasingly lower or higher temperature for cooling or heating, respectively. The global aerodynamic forces on the cylinder as vortices shed was investigated. The flow is visualized by plotting the streamlines, temperature fields, and velocity magnitude contours for the different spacing ratios and compared to the flow regimes in literature namely, Extended-body, Reattachment, and Co-shedding regimes. The drag and surface heat transfer coefficients are analyzed for different scenarios. The effect of heating on the fluid properties and the resulted wakes in the flow are found to be strongly influenced by Re and L/D. The scenario of heated upstream and unheated downstream cylinders was found to increase the mean drag coefficient Cd on the upstream cylinder for L/D=2 & 4 but is not as evident for the downstream cylinder. The heat transfer coefficient h on the upstream cylinder remained approximately the same regardless of a heated or unheated downstream cylinder. In contrast, h of the downstream cylinder decreases for the scenario of heated upstream and downstream cylinder.
AB - Heated and unheated flows with forced convection over two fixed circular cylinders in tandem are studied numerically for 80 ≤ Re ≤ 250 and 1 ≤ T∗ ≤ 2.3. Three different spacing ratios (L/D) = [2, 4, 8] are considered under three heating conditions. The scenarios considered are (1) heated upstream and unheated downstream cylinders, (2) unheated upstream and heated downstream cylinders and (3) heated upstream and downstream cylinders. These scenarios represent the limiting case for a cross-flow heat exchanger, where the downstream tubes are at increasingly lower or higher temperature for cooling or heating, respectively. The global aerodynamic forces on the cylinder as vortices shed was investigated. The flow is visualized by plotting the streamlines, temperature fields, and velocity magnitude contours for the different spacing ratios and compared to the flow regimes in literature namely, Extended-body, Reattachment, and Co-shedding regimes. The drag and surface heat transfer coefficients are analyzed for different scenarios. The effect of heating on the fluid properties and the resulted wakes in the flow are found to be strongly influenced by Re and L/D. The scenario of heated upstream and unheated downstream cylinders was found to increase the mean drag coefficient Cd on the upstream cylinder for L/D=2 & 4 but is not as evident for the downstream cylinder. The heat transfer coefficient h on the upstream cylinder remained approximately the same regardless of a heated or unheated downstream cylinder. In contrast, h of the downstream cylinder decreases for the scenario of heated upstream and downstream cylinder.
KW - Drag coefficient
KW - Flow characteristics
KW - Forced convection
KW - Heated cylinders
KW - Spacing ratios
KW - Tandem cylinders
UR - http://www.scopus.com/inward/record.url?scp=85112072698&partnerID=8YFLogxK
U2 - 10.1115/HT2021-63848
DO - 10.1115/HT2021-63848
M3 - Conference contribution
AN - SCOPUS:85112072698
T3 - Proceedings of the ASME 2021 Heat Transfer Summer Conference, HT 2021
BT - Proceedings of the ASME 2021 Heat Transfer Summer Conference, HT 2021
T2 - ASME 2021 Heat Transfer Summer Conference, HT 2021
Y2 - 16 June 2021 through 18 June 2021
ER -