Cutting-grinding mill - IKA MF10

The IKA® MF 10 analytical mill is a continuously operating universal mill. The mill is equipped with the impact grinding head which can be used for milling of bulky, elastic, fibrous, cellulose and soft materials (e.g. hay, straw, plastic waste, paper, wood, etc.). The ground material is cut between rotary blades and standing blades attached at the grinding surface. The ground material is conveyed into the collecting plan by means of filters here as well. The feed unit (guide channel) makes it possible to load awkward, bulky material. The cutting loads mean that less energy is introduced into the ground material and thus results in less heat generation. This keeps ground material loss to a minimum. Accessories: Sieve insert with hole sizes: Ø 1.00 mm Specification: Design voltage: VAC 230 ± 10 % Design frequency Hz 50 / 60 Power input W 1000 Rotor speed rpm 3000–6500 Peripheral speed impact grinding m/s 35 Cutting speed cutting grinding m/s 24 Cyclic duration min 120 / 30 Intermittent operation Perm. ambient temperature °C + 5 ... + 40 Perm. relative humidity % 80 Protection class acc. EN 60529 IP 22 Protection at overloaded Current limitation Fuses on mains plate 230 V A 6,3 Id.-No. 14 080 00 115 V A 12 Id.-No. 26 493 00 Safety Temperature switch on motor, door limit switch Protection class I Overvoltage category II Contamination level 2 Noise level dbA max. 85 Operation at a terrestrial altitude m max. 2000 Dimensions (WxDxH) mm 310x570x370 Weight kg 10